What are the methods of recycling waste cable wires, and what is the best?

There are many methods of recycling waste cable wires, for example, peeling, freezing and burning, etc. But because they can cause pollution and have a lower working efficiency, these methods are all not the best methods. The best method is using the copper wire recycling machine to recycle the waste cable wires, because it avoid the above problems.Let me tell you the specific reasons in it.

1. Manual peeling

The method adopts an artificial method to peel off the skin of the waste cable wires. The method of manual peeling can not cause pollution to the environment seriously, but the speed of it is very slow, which should take a lot of time, and requires high labor costs.Besides, it can't offer the labors an clean working environment, so it is not an easy thing to employ labors.So we don't suggest you to adopt the method.

2. Burning

The method is a traditional method that burns the plastic skin of the waste cable and then recovers the copper in it, it can process the waste cable wires quickly, but the generated smoke pollution is extremely serious. At the same time, the surface of the copper wire is severely oxidized during the incineration process, which reduces the metal recovery rate. Therefore, it is not a good method, either.

3. Freezing

This method was also a traditional recycling method. It uses liquid nitrogen as a refrigerant to make waste cable wires brittle at extremely low temperatures, and then breaks and vibrates to separate the plastic skin from the copper wire segment. If you use the method to recycle waste cable wires, you should spend a lot of costs to purchase a large amount of liquid nitrogen. And it is difficult to advancing the industrial production. So, you shouldn't use this method to recycle waste cable wires.

4. Using the copper wire recycling machine

The best method of recycling waste cable wires

This way adopts the method of shredding, crushing, air separation and electrostatic separation in the whole recycling process. The shredder and crusher can crush the various wires into small particles, which will make it easy for copper wire recycling machine to process. Then by using air separator and electrostatic separator, the copper and plastic will be separated from these particles. The electrostatic separator adopts the principle of different conductivities of metal and non-metal in the magnetic field to separate copper and plastic. So the separation rate can reach to 99%. The machine also has PLC control system to make the automation high and operation simple, which help you save a lot of labor costs. Besides, the machines adopt complete dry type physical separation method in the whole recycling process, thereby avoiding the adverse effect of the incineration method to the environment.

By comparison, we can see that using the copper wire recycling machine is the best way to recycle the waste cable wires.Therefore, we suggest you to use the copper wire recycling machine to recycle the waste cable wires.

Henan Doing Environmental Protection Technology Co.,ltd do the company specializing in the production of environmental protection equipment. Over the years, we have gotten the favor of customers with a relatively low price and professional copper wire recycling machine. If you need to recycle copper from waste cable wires, welcome to contact us. We will offer you more information about the copper wire recycling machine!